Facts and Figures

TUM is one of Europe's best universities. Since 1868 TUM has constantly performed at the vanguard of university rankings, with TUM members regularly earning renowned honors and awards. Discover the key to these successes.

Street scene on our Munich campus

The university in figures

0
Students
0
Nobel Prizes
0
Start-ups a year

Awards and honors

Members of our university regularly receive prominent honors. TUM itself also awards renowned prizes.

Awards and Honors

Faculty

Our faculty includes over 600 professors, with the share of women among them constantly increasing.

Our professors

History

The Polytechnic School Munich was founded in 1868. Discover the milestones on the School's journey to becoming today's TUM.

History

University of Excellence

TUM has been honored three times in a row as one of Germany's top universities. The goal: Top-class international performance.

University of Excellence

Ranking positions

Vanguard positions Germany-wide, optimum study conditions, top grades from the corporate sector: TUM performs excellently in international ranking lists.

 

  • 6/2/2022
  • Reading time 4 min.

Scaffolds created by melt electrowriting aim to support new tissue formation

3D printed, bioinspired heart valves

Researchers have developed 3D printed artificial heart valves designed to allow a patient’s own cells to form new tissue. To form these scaffolds using melt electrowriting – an advanced additive manufacturing technique – the team has created a new fabrication platform that enables them to combine different precise, customized patterns and hence to fine-tune the scaffold’s mechanical properties. Their long-term goal is to create implants for children that develop into new tissue and therefore last a lifetime.

Petra Mela, Professor of Medical Materials and Implants at the Technical University of Munich (TUM) and doctoral candidate Kilian Meuller examine an artificial heart valve produced with the additive manufacturing technology melt electrowriting. Andreas Heddergott / TUM
Petra Mela, Professor of Medical Materials and Implants at the Technical University of Munich (TUM) and doctoral candidate Kilian Meuller examine an artificial heart valve produced with the additive manufacturing technology melt electrowriting.

In the human body, four heart valves ensure that blood flows in the correct direction. It is essential that heart valves open and close properly. To fulfil this function, heart valve tissue is heterogeneous, meaning that heart valves display different biomechanical properties within the same tissue.

A team of researchers working with Petra Mela, Professor of Medical Materials and Implants at the Technical University of Munich (TUM), and Professor Elena De-Juan Pardo from The University of Western Australia, have now, for the first time, imitated this heterogeneous structure using a 3D printing process called melt electrowriting. To do this, they have developed a platform that facilitates printing precise customized patterns and their combination, which enabled them to fine-tune different mechanical properties within the same scaffold.

Melt electrowriting enables the creation of precise and customized fiber scaffolds

Melt electrowriting is a comparatively new additive manufacturing technology that uses high voltage to create accurate patterns of very thin polymer fibers. A polymer is heated, melted and pushed out of a printing head as a liquid jet to form the fibers.

During this process, a high-voltage electric field is applied, which considerably narrows the diameter of the polymer jet by accelerating it and pulling it towards a collector. This results in a  thin fiber with a diameter typically in the range of five to fifty micrometers. Moreover, the electric field stabilizes the polymer jet, which is important for creating defined, precise patterns.

The “writing” of the fiber jet according to predefined patterns is conducted using a computer-controlled moving collector. Similar to moving a slice of bread below a spoon dripping with honey, the moving platform collects the emerging fiber along a defined pathway. The user specifies this pathway by programming its coordinates.

In order to considerably reduce the programming effort associated with the creation of complex structures for heart valves, the researchers developed a software to easily assign different patterns to different regions of the scaffold by choosing from a library of available patterns. Furthermore, geometrical specifications such as the length, diameter and thickness of the scaffold can easily be adjusted via the graphical interface.

The heart valve scaffolds are compatible with cells and biodegradable

The team used medical grade polycaprolactone (PCL) for 3D printing, which is compatible with cells and biodegradable. The idea is that once the PCL-heart valves are implanted, the patient’s own cells will grow on the porous scaffold, as has been the case in first cell culture studies. The cells might then potentially form new tissue, before the PCL-scaffold degrades.

The PCL-scaffold is embedded in an elastin-like material that imitates properties of natural elastin present in real heart valves and provides micro-pores smaller than the pores of the PCL structure. The aim is to leave enough space for the cells to settle, but to seal the valves adequately for blood flow.

The engineered valves were tested using a mock flow circulatory system simulating physiological blood pressure and flow. The heart valves opened and closed correctly under the examined conditions.

Nanoparticles allow for visualization using MRI

The PCL-material was further evolved and evaluated together with Franz Schilling, Professor of Biomedical Magnetic Resonance, and Sonja Berensmeier, Professor of Bioseparation Engineering at TUM. By modifying PCL with ultrasmall superparamagnetic iron oxide nanoparticles, the researchers could visualize the scaffolds using magnetic resonance imaging (MRI). The modified material remains printable and compatible with cells. This might facilitate the translation of the technology to the clinics, as the scaffolds can thus be monitored upon implantation.

“Our goal is to engineer bioinspired heart valves that support the formation of new functional tissue in patients. Children would especially benefit from such a solution, as current heart valves do not grow with the patient and therefore have to be replaced over the years in multiple surgeries. Our heart valves, in contrast, mimic the complexity of native heart valves and are designed to let a patient’s own cells infiltrate the scaffold”, says Petra Mela.

The next step on the way to the clinic will be pre-clinical studies in animal models. The team also works on further improving the technology and developing new biomaterials.

Publications

Saidy, N. T., Fernández-Colino, A., Heidari, B. S., Kent, R., Vernon, M., Bas, O., Mulderrig, S., Lubig, A., Rodríguez-Cabello, J. C., Doyle, B., Hutmacher, D. W., De-Juan-Pardo, E. M., Mela, P., Spatially Heterogeneous Tubular Scaffolds for In Situ Heart Valve Tissue Engineering Using Melt Electrowriting. Adv. Funct. Mater. 2022, 2110716. doi.org/10.1002/adfm.202110716

Mueller, K. M. A., Topping, G. J., Schwaminger, S. P., Zou, Y., Rojas-González, D. M., De.Juan-Pardo, E., Berensmeier, S., Schilling, F., Mela, P., Visualization of USPIO-labeled melt-electrowritten scaffolds by non-invasive magnetic resonance imaging, Biomater. Sci. 2021, 9, 4607-4612. doi.org/10.1039/D1BM00461A

Further information and links
  • Prof. Petra Mela and Prof. Franz Schilling are Principal Investigators at the Munich Institute of Biomedical Engineering (MIBE). MIBE is an Integrative Research Institute (IRI) within the Technical University of Munich (TUM) that fosters interdisciplinary cooperation and synergies between researchers from the broad field of Biomedical Engineering. At MIBE, researchers specializing in medicine, the natural sciences, and engineering join forces to develop new methods for preventing, diagnosing or treating diseases. The activities cover the entire development process – from the study of basic scientific principles through to their application in new medical devices, medicines and software. www.bioengineering.tum.de/en/
  • Prof. Mela also carries out research at the TUM School of Engineering and Design, Department of Mechanical Engineering.
  • Researchers from the following institutions contributed to the studies: the Technical University of Munich (TUM), Queensland University of Technology (QUT), RWTH Aachen University, The University of Western Australia and the University of Valladolid. SEM imaging of melt electrowriting scaffolds was performed at the Central Analytical Research Facility operated by the Institute for Future Environments and supported by Science and Engineering Faculty at QUT.
  • The research was funded by the Australian Research Council, the Centre in Regenerative Medicine, the German Research Foundation (DFG), the START-Program of the Medical Faculty of RWTH Aachen University, the Spanish Government, Junta de Castilla y León, Interreg V España Portugal POCTEP and Centro en Red de Medicina Regenerativa y Terapia Celular de Castilla y León. Open access funding was enabled and organized by Projekt DEAL.

High resolution images

Technical University of Munich

Corporate Communications Center

Contacts to this article:

Prof. Dr. Petra Mela
Technische Universität München
Lehrstuhl für Medizintechnische Materialien und Implantate
Tel: 089 289 16701
petra.mela@tum.de

Back to list

News about the topic

Our degree programs

Campus locations

Our university is no longer only present in Munich and Bavaria: We operate our own campus locations at sites on several continents.

Sites

Organization and governance

Committees, administration, scientific facilities: Our university's organizational structure.

Organization

HSTS