TUM – Technical University of Munich Menu
Prof. Wall (r) and Dr. Biehler at work on their virtual lung model.
Prof. Wall (r) and Dr. Biehler at work on their virtual lung model.
Image: A. Kerler / bavariaone
  • Covid-19, Research news
  • Reading time: 3 MIN

Computational model of the lung could significantly reduce the number of deaths from Covid-19 and ARDSComputer model enables protective ventilation

The use of mechanical ventilation can save lives – and not just for COVID-19 patients who develop severe respiratory problems. But at the same time, the ventilation pressure puts immense stress on delicate lung tissue. Especially for patients with preexisting lung damage, the use of ventilators can prove deadly. A computational lung model that’s been developed by the Technical University of Munich (TUM) can be used to reduce damage caused by mechanical ventilation – and could increase survival rates for patients significantly.

For patients suffering from acute lung failure (Acute Respiratory Distress Syndrome, ARDS), mechanical ventilation is a lifesaving treatment. But the situation is paradoxical: at the same time that medical teams employ ventilation to keep a patient’s lungs open to ensure the continuous exchange of oxygen and CO2, the ventilation pressure can cause such severe damage to the lungs that it results in the patient’s death.

Doctors treating patients for acute respiratory problems have a limited range of parameters to work with when determining the best protocol for mechanical ventilation – pressure limits, oxygen level and air flow, for example.

But the lung is a complex organ, and the amount of pressure necessary to keep all parts of the lung open to airflow can actually cause damage to some parts through overdistention of the tissue. Additionally, doctors need to minimize repeated recruitment and derecruitment of parts of the lungs during mechanical ventilation, since both can irritate the lung tissue and trigger inflammation.

Making the invisible visible

According to researcher Wolfgang Wall, Professor for Computational Mechanics at TUM, “The real crux of the problem is that when we’re treating a patient using mechanical ventilation, up until now, there hasn’t been any way to detect overdistention of the lung tissue. From the main bronchial tubes through to the tiniest structures in the lungs, there are more than 20 levels of branching. Currently, there’s no method for measuring what’s happening in the smallest, microlevel branches of the lung during artificial respiration.”

Although some medical texts still – inaccurately – portray the lung’s air sacs (alveoli) as similar to grapevines and bunches of grapes, lung tissue actually has a more sponge-like consistency. And it’s through this fine-walled tissue where the exchange between the air and the bloodstream occurs. Breathing comprises an extremely complex mechanical interaction between the different types of tissue, the liquid film on the tissue and the flow of air.

For several years, TUM researchers have been working to develop ever-more sophisticated models to simulate the behavior of lung tissue and airflow. Together with improved methods of micromechanical testing on lung tissue samples, their research has resulted in the creation of a computational lung model.

This model is the basis of a computer program which can calculate the local strains which would be placed on the lung’s microlevel tissues by different ventilator settings. Having these data at hand, medical staff and doctors can adjust the ventilator settings accordingly to provide a protective ventilation.

Using artificial intelligence to interpret the data

The current clinical standards guiding treatment with mechanical ventilation use a patient’s body weight to determine optimal ventilator pressure settings. However, the program developed by Prof. Wall and his team models the actual lung based on data compiled from a CT lung scan. It even considers the condition of individual areas of the lung that have already been damaged by the disease or previous injuries.

By measuring the changes in pressure and volume that occur during an inhalation and exhalation cycle, the digital lung model calculates the individual mechanical characteristics of the patient’s lungs. The result: a digital “twin” model of the patient’s lungs. It is so precise, that it can accurately predict which ventilator settings will cause damage to the patient’s lungs.

From the research lab to the hospital – testing this model in real-life clinical settings

Parallel to continuing his working group’s research together with clinical partners, Prof. Wall and three former colleagues founded the company “Ebenbuild” to bring their research into clinical practice as quickly as possible.

A key step in realizing this goal was automating the generation of lung models using artificial intelligence (AI). Prof. Wall and his team have harnessed the computing power of AI to developed a digital tool that can “map” a patient’s lungs – and which can even be used for early detection of COVID-19 infections.

“More than 80 percent of COVID-19 deaths are the result of acute lung failure,” says Prof. Wall. “And with long-term mechanical ventilation, the survival rate for our most critically ill patients drops to only 50 percent,” he adds. “The goal of our work is that in the future, at each ventilation site a digital lung model helps to optimize the ventilation to the patient’s needs so that we can significantly increase the chance of survival.”

Publications:

C. J. Roth, T. Becher, I. Frerichs, N. Weiler, W. A. Wall:
Coupling of EIT with computational lung modelling for predicting patient-specific ventilatory responses
Journal of Applied Physiology, 122 (2017), 855-867 – DOI: 10.1152/japplphysiol.00236.2016

C. J. Roth, M. Ismail, L. Yoshihara, W. A. Wall:
A comprehensive computational lung model incorporating inter-acinar dependencies: Application to spontaneous breathing and mechanical ventilation
International Journal for Numerical Methods in Biomedical Engineering, 33 (2017), e02787
DOI: 10.1002/cnm.2787

C. J. Roth, L. Yoshihara, W. A. Wall:
Computational Modeling of Respiratory Biomechanics
In R. Narayan (Ed.), Encyclopedia of Biomedical Engineering, Elsevier, 2018, vol. 2, pp. 70–80

More information:

This research was sponsored by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation). The founding of the company, Ebenbuild, was supported under the auspices of the EXIST Program, which is financed by the German Federal Ministry for Economic Affairs and Energy. Basis model calculations were conducted at the Leibniz Supercomputing Centre of the Bavarian Academy of Sciences and Humanities, located at the research campus Garching.

High resolution images

Video: Research at the lung modell (2015) (Youtube, 3:21)

Corporate Communications Center

Technical University of Munich Dr. Andreas Battenberg
battenberg(at)zv.tum.de

Contacts to this article:

Prof. Dr.-Ing. Wolfgang A. Wall
Institute for Computational Mechanics
Technical University of Munich
Boltzmannstr. 15, 85748 Garching, Germany
Tel.: +49 89 289 15302
wolfgang.a.wall(at)tum.de

Article at tum.de

Conventional chest x-ray

New x-ray method for Corona diagnosis ready for patient testing

Researchers at the Technical University of Munich (TUM) have developed an innovative x-ray method for lung diagnostics, which they now plan to test in one of its first applications for diagnosis of the respiratory ailment...

Person wachting at a smartphone

Encryption system for a secure contact tracing app

In the fight against Covid-19, an interdisciplinary research team at the Technical University of Munich (TUM) has developed a model for a contact tracing app that protects personal data. The concept is based on an...

Student with laptop and tablet computer

The future of digital studies has arrived

The Technical University of Munich (TUM) has started its summer semester, which will take place primarily online due to the coronavirus pandemic. At very short notice, TUM has drastically expanded its digital curriculum so...

Scientists will collect biodata using in-ear sensors

In-ear sensors to help in fight against COVID-19

A team at the Technical University of Munich (TUM) plans to use high-tech biometric sensors for 24-hour monitoring of COVID-19 patients in home isolation. The goal of the study is to find out whether rapid treatment in...

Staff member of the virology department at TUM evaluating the antibody tests.

Large Antibody Study at the Klinikum rechts der Isar

One of the largest antibody studies against SARS-CoV-2 in Germany has begun at the university hospital Klinikum rechts der Isar at Technical University of Munich (TUM). The employee study is intended to provide data on the...

Prof. Christoph Lütge

“Short-term decisions can have a long-term impact on our world”

The weapons deployed in the fight against the covid-19 pandemic also include artificial intelligence. AI might be able to recognize patterns in the spread of the disease, for example. These new possibilities raise ethical...

In the university hospital TUM Klinikum rechts der Isar, drugs against Covid-19 are tested.

Medications against coronavirus in trial

The university hospital is participating in studies on new medications for people suffering from Covid-19. As part of a clinical study, patients can be treated with medications that are still under development. 50 patients...

3D-Tomografie einer Säugetierlunge. (Bild: Robert Metzke, Burkhard Schillinger, TU München)

New strategies could save thousands of lives

According to current estimates, over 100,000 patients in Europe receive intensive medical care for acute pulmonary failure each year. Where patients require mechanical ventilation over several days, the survival rate falls...