Petra Mela, Professor of Medical Materials and Implants at the Technical University of Munich (TUM) and doctoral candidate Kilian Meuller examine an artificial heart valve produced with the additive manufacturing technology melt electrowriting.
Petra Mela, Professor of Medical Materials and Implants at the Technical University of Munich (TUM) and doctoral candidate Kilian Meuller examine an artificial heart valve produced with the additive manufacturing technology melt electrowriting.
Image: Andreas Heddergott / TUM
  • Research news
  • Reading time: 4 MIN

Scaffolds created by melt electrowriting aim to support new tissue formation3D printed, bioinspired heart valves

Researchers have developed 3D printed artificial heart valves designed to allow a patient’s own cells to form new tissue. To form these scaffolds using melt electrowriting – an advanced additive manufacturing technique – the team has created a new fabrication platform that enables them to combine different precise, customized patterns and hence to fine-tune the scaffold’s mechanical properties. Their long-term goal is to create implants for children that develop into new tissue and therefore last a lifetime.

In the human body, four heart valves ensure that blood flows in the correct direction. It is essential that heart valves open and close properly. To fulfil this function, heart valve tissue is heterogeneous, meaning that heart valves display different biomechanical properties within the same tissue.

A team of researchers working with Petra Mela, Professor of Medical Materials and Implants at the Technical University of Munich (TUM), and Professor Elena De-Juan Pardo from The University of Western Australia, have now, for the first time, imitated this heterogeneous structure using a 3D printing process called melt electrowriting. To do this, they have developed a platform that facilitates printing precise customized patterns and their combination, which enabled them to fine-tune different mechanical properties within the same scaffold.

Melt electrowriting enables the creation of precise and customized fiber scaffolds

Melt electrowriting is a comparatively new additive manufacturing technology that uses high voltage to create accurate patterns of very thin polymer fibers. A polymer is heated, melted and pushed out of a printing head as a liquid jet to form the fibers.

Close-up of a cylinder in a Melt Electrowriting system showing a printed heart valve scaffold.
Close-up of a cylinder in a Melt Electrowriting system showing a printed heart valve scaffold.
Image: Andreas Heddergott / TUM

During this process, a high-voltage electric field is applied, which considerably narrows the diameter of the polymer jet by accelerating it and pulling it towards a collector. This results in a  thin fiber with a diameter typically in the range of five to fifty micrometers. Moreover, the electric field stabilizes the polymer jet, which is important for creating defined, precise patterns.

The “writing” of the fiber jet according to predefined patterns is conducted using a computer-controlled moving collector. Similar to moving a slice of bread below a spoon dripping with honey, the moving platform collects the emerging fiber along a defined pathway. The user specifies this pathway by programming its coordinates.

In order to considerably reduce the programming effort associated with the creation of complex structures for heart valves, the researchers developed a software to easily assign different patterns to different regions of the scaffold by choosing from a library of available patterns. Furthermore, geometrical specifications such as the length, diameter and thickness of the scaffold can easily be adjusted via the graphical interface.

The heart valve scaffolds are compatible with cells and biodegradable

The team used medical grade polycaprolactone (PCL) for 3D printing, which is compatible with cells and biodegradable. The idea is that once the PCL-heart valves are implanted, the patient’s own cells will grow on the porous scaffold, as has been the case in first cell culture studies. The cells might then potentially form new tissue, before the PCL-scaffold degrades.

The PCL-scaffold is embedded in an elastin-like material that imitates properties of natural elastin present in real heart valves and provides micro-pores smaller than the pores of the PCL structure. The aim is to leave enough space for the cells to settle, but to seal the valves adequately for blood flow.

The engineered valves were tested using a mock flow circulatory system simulating physiological blood pressure and flow. The heart valves opened and closed correctly under the examined conditions.

Nanoparticles allow for visualization using MRI

The PCL-material was further evolved and evaluated together with Franz Schilling, Professor of Biomedical Magnetic Resonance, and Sonja Berensmeier, Professor of Bioseparation Engineering at TUM. By modifying PCL with ultrasmall superparamagnetic iron oxide nanoparticles, the researchers could visualize the scaffolds using magnetic resonance imaging (MRI). The modified material remains printable and compatible with cells. This might facilitate the translation of the technology to the clinics, as the scaffolds can thus be monitored upon implantation.

Petra Mela, Professor of Medical Materials and Implants at TUM.
Petra Mela, Professor of Medical Materials and Implants at TUM.
Image: Andreas Heddergott / TUM

“Our goal is to engineer bioinspired heart valves that support the formation of new functional tissue in patients. Children would especially benefit from such a solution, as current heart valves do not grow with the patient and therefore have to be replaced over the years in multiple surgeries. Our heart valves, in contrast, mimic the complexity of native heart valves and are designed to let a patient’s own cells infiltrate the scaffold”, says Petra Mela.

The next step on the way to the clinic will be pre-clinical studies in animal models. The team also works on further improving the technology and developing new biomaterials.

  •  A close-up of a printed scaffold for a heart valve. The different structures that ensure the appropriate biomechanics are clearly visible.
    A close-up of a printed scaffold for a heart valve. The different structures that ensure the appropriate biomechanics are clearly visible. Image: Andreas Heddergott / TUM
  • Kilian Mueller, a doctoral candidate at the TUM School of Engineering and Design, tests the functionality of a 3D printed heart valve in a mock-up blood circulation system.
    Kilian Mueller, a doctoral candidate at the TUM School of Engineering and Design, tests the functionality of a 3D printed heart valve in a mock-up blood circulation system. Image: Andreas Heddergott / TUM
  • Kilian Mueller, a doctoral candidate at the TUM School of Engineering and Design, examines a 3D printed heart valve structure produced using Melt Electrowriting (MEW).
    Kilian Mueller, a doctoral candidate at the TUM School of Engineering and Design, examines a 3D printed heart valve structure produced using Melt Electrowriting (MEW). Image: Andreas Heddergott / TUM

Publications:

Saidy, N. T., Fernández-Colino, A., Heidari, B. S., Kent, R., Vernon, M., Bas, O., Mulderrig, S., Lubig, A., Rodríguez-Cabello, J. C., Doyle, B., Hutmacher, D. W., De-Juan-Pardo, E. M., Mela, P., Spatially Heterogeneous Tubular Scaffolds for In Situ Heart Valve Tissue Engineering Using Melt Electrowriting. Adv. Funct. Mater. 2022, 2110716. doi.org/10.1002/adfm.202110716

Mueller, K. M. A., Topping, G. J., Schwaminger, S. P., Zou, Y., Rojas-González, D. M., De.Juan-Pardo, E., Berensmeier, S., Schilling, F., Mela, P., Visualization of USPIO-labeled melt-electrowritten scaffolds by non-invasive magnetic resonance imaging, Biomater. Sci. 2021, 9, 4607-4612. doi.org/10.1039/D1BM00461A

More information:

  • Prof. Petra Mela and Prof. Franz Schilling are Principal Investigators at the Munich Institute of Biomedical Engineering (MIBE). MIBE is an Integrative Research Institute (IRI) within the Technical University of Munich (TUM) that fosters interdisciplinary cooperation and synergies between researchers from the broad field of Biomedical Engineering. At MIBE, researchers specializing in medicine, the natural sciences, and engineering join forces to develop new methods for preventing, diagnosing or treating diseases. The activities cover the entire development process – from the study of basic scientific principles through to their application in new medical devices, medicines and software. www.bioengineering.tum.de/en/
  • Prof. Mela also carries out research at the TUM School of Engineering and Design, Department of Mechanical Engineering.
  • Researchers from the following institutions contributed to the studies: the Technical University of Munich (TUM), Queensland University of Technology (QUT), RWTH Aachen University, The University of Western Australia and the University of Valladolid. SEM imaging of melt electrowriting scaffolds was performed at the Central Analytical Research Facility operated by the Institute for Future Environments and supported by Science and Engineering Faculty at QUT.
  • The research was funded by the Australian Research Council, the Centre in Regenerative Medicine, the German Research Foundation (DFG), the START-Program of the Medical Faculty of RWTH Aachen University, the Spanish Government, Junta de Castilla y León, Interreg V España Portugal POCTEP and Centro en Red de Medicina Regenerativa y Terapia Celular de Castilla y León. Open access funding was enabled and organized by Projekt DEAL.

High resolution images

Technical University of Munich

Corporate Communications Center Carolin Lerch
carolin.lerch(at)tum.de

Contacts to this article:

Prof. Dr. Petra Mela
Technische Universität München
Lehrstuhl für Medizintechnische Materialien und Implantate
Tel: 089 289 16701
petra.mela@tum.de

Related articles at www.tum.de

Ceren Kimna, doctoral candidate at the Technical University of Munich, examines the newly developed film for wound healing.

Multi-functional bandage helps wounds to heal

Researchers at the Technical University of Munich (TUM) have developed a film that not only protects wounds similar to the way a bandage does, but also helps wounds to heal faster, repels bacteria, dampens inflammation,…

Dr. Christine M. Poch

A repair program for the heart

Following a heart attack, the human body is incapable of repairing lost tissue due to the heart’s inability to generate new muscle. However, treatment with heart progenitor cells could result in the formation of functional…

Prof. Dr. Werner Hemmert and Dr. Siwei Bai have developed a computer model which predicts the neuronal activation patterns that cochlea implants create in the auditory nerve.

Research towards improved cochlear implants

Cochlear implants restore hearing in deaf people to an amazingly high level. In order to optimize such implants, researchers at the Technical University of Munich (TUM) have developed a computer model which predicts the…